Claro
12Seiten

Katalogauszüge

The LED Generation…. For Schréder, it is innovative, intelligent and responsible. We have developed a complete range of LED luminaires across all our business sectors: street lighting, urban lighting, tunnel lighting and illuminations. These products reect our desire to continue “Right Lighting”, by offering technological solutions that make this new light source a valid alternative to traditional sources. To do so, we have developed concepts that will make LEDs the new instrument of our ambition - to offer the lighting solutions of tomorrow. POWERFUL PHOTOMETRIC ENGINES OrientoFlex®...

Katalog auf Seite 2 öffnen

RELIABLE SOLUTIONS To offer reliable, durable and effective solutions, Schréder has developed two ThermiX® concepts: ThermiX®. Optimise heat extraction to maintain 80% of the nominal luminous flux(*) at 60,000 hours of use up to a maximum ambient temperature of 35°C. This concept is based on several factors: • Thermal compartmentalisation between the LEDs and the control gear; • Direct conduction by minimising the path between the heat source and the outside; • Optimised design of the external heat exchange surface; • A temperature sensor to avoid accidental overheating. (*) 70% for certain...

Katalog auf Seite 3 öffnen

claro 1 COMPACTNESS, DESIGN AND PERFORMANCE The luminaire Claro 1 may be equipped with 28 or 42 LEDs. This range has been specially designed for street and residential lighting. Colour: AKZO grey 150 sanded Design: A. Baré OPTIONS CHARACTERISTICS - LUMINAIRES Optical compartment tightness level: IP 66 (*) Impact resistance (glass): IK 08 (**) Nominal voltage: 230 V - 50 Hz Electrical class: • 3500K warm white IP 66 LEDSafe®(*) Electronic compartment tightness level: • All RAL and AKZO colours I or II (*) Weight (total): Claro 1: Claro 1: • Inclination systems for horizontal or vertical...

Katalog auf Seite 4 öffnen

ORIENTO ®, A POWERFUL PHOTOMETRIC ENGINE Claro luminaires are equipped with the Oriento® photometric system. This system is based on precisely oriented LEDs that are equipped with meticulously selected lenses. Each LED associated with a lens has a specific orientation. The combination of all the LEDs creates the overall light distribution of the luminaire. LEDs are grouped into units of 3 and are directed according to the desired light distribution. Each LED group has a lens disc, depending on the number of LEDs. PHOTOMETRY High-power white LEDs Type Lumiled Rebel Maintained luminous flux...

Katalog auf Seite 5 öffnen

claro 1 Die-cast aluminium cover enclosing the optical compartment IP 66 LEDSafe® completely sealing it. The design of the photometric engine means that it is compatible SELV power supply 350 mA. Intensity variation (dimming) (optional). with the FutureProof concept; it may ThermiX®: short, direct thermal Die-cast aluminium cover enclosing the IP 66 electronics compartment. The power supply (as well as the dimming) is mounted on a removable be replaced on-site in order to take advantage of future technological developments. path for better dispersion LEDs in 4150K of heat. neutral white...

Katalog auf Seite 6 öffnen

ThermiX ® : THERMAL MANAGEMENT Each LED circuit is mounted on an aluminium transition part, the design of which simultaneously ensures the precise orientation for the LEDs and the thermal conduction that optimises rapid transfer of heat to the outside. We have developed the ThermiX® concept around the optimisation of several factors involved in the thermal management of LEDs: • Thermal compartmentalisation between the LEDs and the control gear; • Direct conduction: the transmission of heat takes the shortest path between its source and the exterior; • Optimised design of the external heat...

Katalog auf Seite 7 öffnen

claro 1 ENERGY CONSUMPTION Claro luminaires exhibit outstanding photometric performance. For example, for a Claro 1 (42 LEDs) used on a M5-classified road 6m wide, and complying with CIE 115 recommendations, the power that must be supplied to meet the required luminance level of 0.5 cd/m² is less than 0.8 W per m² of road per cd/m² required. This also takes into account the depreciation factors for both the LEDs and the luminaire. For 4,000 hours of use per year, for 100m of roadway, this corresponds to consumption of less than 2.5 kWh/day, or emissions of less than 1.15 kg CO2/ day,...

Katalog auf Seite 8 öffnen

52865-CLARO1-LED-AN.indd 12 Copyright © Schréder S.A. 2010 - Executive Publisher: Luc de Lamalle - L.a.W. S.A. - rue de Mons 3 - B-4000 Liège (Belgium) - The information, descriptions and illustrations herein are of only an indicative nature. Due to advanced developments, we may be required to alter the characteristics of our products without notice. As these may present different characteristics according to the requirements of individual countries, we invite you to consult us. Schréder www.schreder.com 07-01-2011 09:20:04 52865-Claro1-br-2010-12-AN

Katalog auf Seite 12 öffnen