Individualmatrizen ?Thonon-les-Bains?
8Seiten

{{requestButtons}}

Katalogauszüge

Individualmatrizen ?Thonon-les-Bains? - 1

Architecte: Cabinet Strates, Lyon Matrices spéciales RECKLI ,,Thonon-les-Bains” RECKLI One Off Formliners ”Thonon-les-Bains” RECKLI-Individualmatrizen ,,Thonon-les-Bains”

Katalog auf Seite 1 öffnen
Individualmatrizen ?Thonon-les-Bains? - 2

Projet de l´architecte Project of the architect Entwurf des Architekten Matrices spéciales RECKLI ,,Thonon-les-Bains’’ Le franchissement de la côtière de la Dranse est une séquence particulière du contournement routier de Thonon-lesBains. En effet, le tracé de cette nouvelle infrastructure vient se glisser sur une démarcation forte entre urbanité et nature : le long de cette côtière qui est l’interface entre le plateau urbanisé et la vallée boisée et préservée de la Dranse. Il s’agissait donc de réussir l’intégration de cette infrastructure routière dans son environnement, en minimisant son...

Katalog auf Seite 2 öffnen
Individualmatrizen ?Thonon-les-Bains? - 3

Image de référence Basic concept Referenzbild Assemblage de 70 maquettes en plâtre (1/10) Assemblage of 70 plaster samples (1/10) Zusammenfügen von 70 Gipsmodellen (1/10) re par le transport des contre-moules : le polyester est plus léger et moins fragile que le plâtre. La répartition et l’assemblage des écailles sont définies en parallèle de la fabrication des motifs. Cette phase est essentielle à l’édification des murs et de l’image qu’ils vont porter. L’objectif de l’architecte est que chacun des cinq motifs soit utilisé en nombre égal tout en visant à l’identité architecturale...

Katalog auf Seite 3 öffnen
Individualmatrizen ?Thonon-les-Bains? - 4

Réception des modèles en polyester chez RECKLI Reception of the master mould in polyester at RECKLI Begutachtung der Polyestermodelle bei RECKLI Démoulage d´une matrice du modèle Demoulding of the formliner from the master mould/pattern Entschalung der Matrize vom Modell Matrices préparées au coulage du béton Formliners prepared for concreting Matrizen vorbereitet zum Betonieren RECKLI One Off Formliners ”Thonon-les-Bains” The crossing of the river "Dranse" is of particular significance in the construction of the new ring road round Thonon-lesBains in the sensitive Rhône-Alpes region in...

Katalog auf Seite 4 öffnen
Individualmatrizen ?Thonon-les-Bains? - 5

Coulage du béton Casting of the concrete Betonguss Démoulage d´une écaille Demoulding of the concrete element Entschalen des Betonelements Elément béton Concrete element Betonelement All in all, SAPB ordered 30 formliners in sizes of 2.18 m x 1.78 m as well as 5 formliners of 2.88 m x 1.78 m. RECKLI also supplied contoured stop-offs, which SAPB was able to position exactly as separating elements on the elastic formliners in order to be able to produce smaller concrete elements on the formliners as well. This solution offers the advantage that sharp contours are possible without the...

Katalog auf Seite 5 öffnen
Individualmatrizen ?Thonon-les-Bains? - 6

RECKLI-Individualmatrizen ,,Thonon-les-Bains’’ Der Uferquerung des Flusses „La Dranse“ kommt beim Bau der neuen Umgehungsstraße von Thonon-les-Bains in der schützenswerten Rhône-AlpesRegion in Frankreich eine besondere Bedeutung zu. Tatsächlich bildet diese neue Straße entlang des Ufers die Schnittstelle zwischen der Stadt Thonon-les-Bains und dem naturbelassenen Tal der Dranse. Vor allem galt es, das Bauvorhaben in das natürliche Umfeld zu integrieren und eine Beeinträchtigung des unberührten Ökosystems zu minimieren. Hieraus erklärt sich die Entscheidung für eine Straße, deren Fahrbahnen...

Katalog auf Seite 6 öffnen
Individualmatrizen ?Thonon-les-Bains? - 7

ren zu können. Diese Lösung bietet den Vorteil, dass trotz der Komplexität der Struktur scharfkantige Absperrungen ohne Gratbildung oder Ausblutung möglich sind. Die Matrizen werden lose in einen Metallrahmen auf die Fertigungstische gelegt. Durch das hohe Eigengewicht der Matrizen erübrigt sich ein Aufkleben auf die Schaltische oder eine andre Befestigungsart. Alle Betonelemente wurden mit einem Index versehen, um so die spätere Verteilung entsprechend der Angabe des Architekten zu gewährleisten. Ein Betonelement ist ca. 3,8 qm groß und wiegt ca. 2 Tonnen. Täglich wurden etwa 50 qm...

Katalog auf Seite 7 öffnen
Individualmatrizen ?Thonon-les-Bains? - 8

RECKLI GmbH Adresse/Address: Eschstraße 30 Postadresse/Mailing Address: Postfach 1013 29 Germany Germany info@reckli.de www.reckli.de Strukturmatrizen Abformtechnik Formen- und Modellbauharze

Katalog auf Seite 8 öffnen

Alle Kataloge und technischen Broschüren von RECKLI GmbH

  1. 3D-Matrize

    4 Seiten

  2. Trends

    12 Seiten

  3. Balusterformen

    12 Seiten

  4. Strukturmatrizen

    372 Seiten

  5. 3D-Béton

    12 Seiten

  6. Artico

    47 Seiten

  7. WetCast

    4 Seiten

Archivierte Kataloge

  1. Referenzkatalog

    68 Seiten