THE INTERNATIONAL EPD® SYSTEM Miralis Mineral Foam From Miralis GmbH Programme operator: EPD registration number: Publication date: Valid until: The International EPD System, www.environdec.com An EPD should provide current Information and may be updated ifconditions change. The stated validity is therefore subject to the continued registration and publication at www. environdec. com

General information Programme information Programme: Address: Website: E-mail: The International EPD® System EPD International AB Box 210 60 SE-100 31 Stockholm Sweden www.environdec.com info@environdec.com Accountabilities for PCR, LCA and independent, third-party verification Product Category Rules (PCR) CEN standard EN 15804 serves as the Core Product Category Rules (PCR) Product Category Rules (PCR): PCR 2019:14-c-PCR-005 Thermal Insulation Products (EN 16783) (c-PCR to PCR 2019:14 Construction Products, version 1.3.4) PCR review was conducted by the Technical Committee of the...

Company information Owner of the EPD: Miralis GmbH Contact: Miralis GmbH, Weba-Straße 15, 4407 Dietach, AUT, E-Mail: office@miralis.eco Description of the organisation: Miralis GmbH, based in Austria, is a system provider for mineral insulation foams and was founded in 2006. It is part of Trivest AG, an international group of companies with innovative products and solutions. The Miralis headquarter is in Dietach near Steyr, including the competence center and production site. Miralis sees the challenge with insulation materials to provide materials that can be 100 % recycled, have a low CO2...

LCA information Study goal: The intended goal of this LCA is to create an EPD of Miralis Mineral Foam with a density of 60 kg/m3, produced in 2024 as the main Miralis product. Mineral foam is used as insulation material in the construction sector. The intended application of the EPD is to provide environmental product information to the target group B2B. The EPD should be conducted according to EN 15804 and ISO 14025. Type of EPD: specific EPD Functional unit: The functional unit is 1 m3 of dry mineral foam (dry density: 60 kg/m3). The mineral foam has a thermal resistance RD of 28,6...

to the functional unit. In modules A3 and A5, 100 % of the charges and credits for the packaging and transportation material disposal are allocated to the functional unit. The loads from recycling in C4 are allocated 100 % to the functional unit. Infrastructure/capital goods: Infrastructure/capital goods are excluded from consideration in the LCA model. Assumptions and waste scenarios: For A1–A5: In A5, 100 % of the foam production waste generated from start-up and cleaning of the foaming system is fed back into the closed-loop production process as filter cake. Plastic and paper packaging...

THE INTERNATIONAL EPD® SYSTEM

System boundaries In-Iine recycling Flow Agent Foam Agent Blackbox production Miralis Dietach Miralis Dietach Cement clinker Miralis GeoBase In-Iine recycling production loss

—EPD® THE INTERNATIONAL EPD® SYSTEM The transport material losses in A2 and A4, as well as the production losses in A3, are assumed to be below the 5 % cut-off. The transport losses in A1 are not declared because of a lack of data. Use stages B2-B7 are not declared due to inaccessible variance in use phases (for example differences in different construction buildings). Using the results of modules A1-A5 without considering the results of module C is not recommended. The following electricity inputs were modeled in A1-A5: Italy 729 g CO2 eq/kWh (EPD-IES-0016451), Germany: 319 g CO2 eq/kWh...

—EPD® THE INTERNATIONAL EPD® SYSTEM

—EPD® THE INTERNATIONAL EPD® SYSTEM

—EPD®THE INTERNATIONAL EPD® SYSTEM Additional mandatory and voluntary impact category indicators The estimated impact results are only relative statements, which do not indicate the endpoints of the impact categories, exceeding threshold values, safety margins, and/or risks.1 This indicator accounts for all greenhouse gases except biogenic carbon dioxide uptake and emissions and biogenic carbon stored in the product. As such, the indicator is identical to GWP-total except that the CF for biogenic CO2 is set to zero.11/12

EPD THE INTERNATIONAL EPD® SYSTEM General Programme Instructions of the International EPD® System. Version 4.0. PCR 2019:14-c-PCR-005 Thermal Insulation products (EN 16783) (c-PCR to PCR 2019:14 Construction Products, version 1.3.4) PCR 2019:14 Construction Products, version 1.3.4 ISO 14025:2006-07: Environmental labels and declarations - Type III environmental declarations - Principles and procedures (1) C. Atzendorfer (2023): Quantitative Auswertung der Diffraktogramme von MIRALIS MINERAL FOAM auf Kalzitgehalt, Lehrstuhl für Gesteinshüttenkunde, Montanuniversität Leoben (2) R. Pomberger,...